logo
Shanghai Jianggong Valve Manufacturing Co., Ltd.
উদ্ধৃতি
পণ্য
পণ্য
বাড়ি > পণ্য > বল ভালভ > ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam
বিভাগসমূহ
যোগাযোগ
যোগাযোগ: Mr. David Chen
ফ্যাক্স: 86-21-58123926
যোগাযোগ করুন
আমাদের মেইল ​​করুন

ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam

পণ্যের বিবরণ

উৎপত্তি স্থল: চীন

পরিচিতিমুলক নাম: JGPV

পেমেন্ট ও শিপিংয়ের শর্তাবলী

ন্যূনতম চাহিদার পরিমাণ: 1set

প্যাকেজিং বিবরণ: পাতলা পাতলা কাঠ বক্স সুরক্ষা প্যাকিং

ডেলিভারি সময়: 14 দিন

পরিশোধের শর্ত: এল/সি, টি/টি, ওয়েস্টার্ন ইউনিয়ন

যোগানের ক্ষমতা: প্রতি মাসে 500 সেট

সেরা দাম পান
বিশেষভাবে তুলে ধরা:

ISO9001 Copper Ball Valve

,

ISO14001 Copper Ball Valve

,

Manual Copper Ball Valve

আবেদন::
সাধারণ
শংসাপত্র::
আইএসও 9001, আইএসও 14001
মাঝারি প্রকার::
জল, বাষ্প এবং তেল ইত্যাদি
সংযোগ::
থ্রেড / ফ্ল্যাঞ্জড / ওয়েল্ডড
স্ট্যান্ডার্ড বা অ-মানক::
স্ট্যান্ডার্ড
প্রবাহের উপায়::
দ্বি উপায়
অভিনয়::
ম্যানুয়াল, বৈদ্যুতিক, বায়ুসংক্রান্ত, স্বয়ংক্রিয়
সিলিং পারফরম্যান্স::
সিলিং
কাজের তাপমাত্রা::
সাধারণ তাপমাত্রা এবং উচ্চ তাপমাত্রা
চাপ অ্যাপ্লিকেশন::
সাধারণ চাপ
মানের ওয়ারেন্টি::
18 মাস
আবেদন::
সাধারণ
শংসাপত্র::
আইএসও 9001, আইএসও 14001
মাঝারি প্রকার::
জল, বাষ্প এবং তেল ইত্যাদি
সংযোগ::
থ্রেড / ফ্ল্যাঞ্জড / ওয়েল্ডড
স্ট্যান্ডার্ড বা অ-মানক::
স্ট্যান্ডার্ড
প্রবাহের উপায়::
দ্বি উপায়
অভিনয়::
ম্যানুয়াল, বৈদ্যুতিক, বায়ুসংক্রান্ত, স্বয়ংক্রিয়
সিলিং পারফরম্যান্স::
সিলিং
কাজের তাপমাত্রা::
সাধারণ তাপমাত্রা এবং উচ্চ তাপমাত্রা
চাপ অ্যাপ্লিকেশন::
সাধারণ চাপ
মানের ওয়ারেন্টি::
18 মাস
ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam
Manual Copper Ball Valve with Inner and Outer Wires
Manual copper ball valve with inner and outer wires
Product Introduction

Two piece internal thread ball valve is a common type of valve, which consists of valve body, valve ball, valve stem, valve seat and other components. Among them, the valve body is composed of two hemispheres connected by threads in the middle. The valve ball is spherical and can rotate inside the valve body to achieve switch control. The valve stem is a component that connects the valve ball and the handle, and controls the opening and closing of the valve ball by rotating the handle. The valve seat is the sealing gasket of the valve ball, which can ensure the sealing performance of the valve.

The characteristics of this valve are simple structure, good sealing, easy operation, and long service life.

Technical Specifications
Parameter Value
Nominal Diameter DN (mm) 15~200
Nominal Pressure PN (MPa) 1.6
Test Pressure (MPa) Strength (water): 2.4
Enclose (Water): 1.76
Main Components Body: WCB/CF8/CF8M
Valve ball: Stainless steel/Carbon steel
Seat: PTFE
Packing: Soft graphite
Shaft: 2Cr13
Handle: Ductile iron
Working temperature ≤150℃
Medium suitable Water, oil, steam
Key Features
  • The fluid resistance is small, and its resistance coefficient is equal to that of a pipe segment of the same length.
  • Simple structure, small size, and light weight.
  • Tight and reliable, plastic is widely used as the sealing surface material for ball valves with good sealing performance, and it has also been widely used in vacuum systems.
  • Easy to operate, quick opening and closing, only need to rotate from fully open to fully closed; Easy to control from a distance.
Product Gallery
অনুরূপ পণ্য